Всем привет,Парни подскажите как прописать кнопки ЦЗ на ключе на

 

Mitsubishi Outlander 2009,ключ второй прописал а с кнопками ни как не получается ,Ключ обычный с двумя кнопками с светодиодом посередине ,Спасибо

Задай вопрос GOOGLE типа "mitsubishi outlander 2009 remote programming" и изучай.

Procedure

1. Ensure ignition is switched off.

2. Short pins 1 to ground of the DLC with a wire link.

3. Within 10 seconds press the HAZARD switch 6 times.

4. Doors should lock and unlock to confirm programming mode.

5. Press & release the LOCK button of the remote.

6. Within 10 sec: Press the LOCK button of the remote twice.

7. Doors should lock and unlock to confirm registration of remote.

8. If programming additional remotes, within 1 minute. Repeat steps 5 & 6 for each remote.

9. Doors should lock and unlock to confirm registration of each remote.

10. Remove wire link to exit programming mode.

Notes: a. All existing remotes will be erased when the programming mode is entered and must be re-programmed

back in as part of the procedure.

b. Ensure all remotes are added within 1 minute of the entering the program mode.

c. A maximum of 4 remotes can be programmed.

 

если прокатит

 

 

у дилеров мутом 600 р

всем спасибо , обучил мпв